Badger Conveyors

Badger 41

Badger Model 41 9" Conveyor

  • Convey up to 70 feet
  • Standard chain speed - approx. 140 feet per min.
  • Standard operating capacity - approx. 72 cubic feet per min. - approx. 57 bushel per min
  • #62 steel detachable chain with corded rubber flights and ribbed steel backing for long life
  • Drive reduction system at "drop off end" V-belt and chain reduction drive system - easy to maintain
  • 16 gauge galvanized steel construction (trough & sides)
  • Frame sections: 4' - 8' or 10'
  • Hopper Included
Badger 70

Badger Model 70 11" Conveyor

  • Convey up to 150 feet (reversible units available)
  • Standard operating capacity - approx. 80 cubicfeet per min. - approx. 64 bushels per min.
  • Rugged 667H pintle chain with corded rubber flights and ribbed steel backing for long life
  • Drive reduction system at "drop off end"
  • V-belt and chain reduction drive system - easy to maintain
  • 14 gauge galvanized steel construction (trough and sides)
  • 16 gauge galvanized steel construction (trough & sides)
  • Frame sections: 5' - 8' or 10'
Badger 55

Badger Model 55 16" Conveyor

  • Convey up to 150 feet
  • Standard chain speed - approx. 117 feet per min.
  • Standard operating capacity - approx. 93 cubic feet per min. - approx. 74 bushel per min.
  • Hook rod chain with welded steel flights incorporate a high density polyethylene flight liner for smooth quiet operation
  • Drive reduction system at "drop off end"
  • V-belt and chain reduction drive system - easy to maintain
  • 16 gauge galvanized sides with enclosed bottom feed trough
  • Frame sections: 5' or 8'
Badger 6000

Badger Model 6000 14" Conveyor

  • Convey/feed up to 200'
  • Standard operating capacity
  • Belt speed - 300' ft/min Plow speed - 60 ft/min approx. 81 cubic ft/min; approx. 64 bu/min approx. 3,650 lbs/min
  • 14" low stretch polyester cord PVC belt
  • 8 1/2" large diameter drive and idler rolls
  • >Snub roller at drive end
  • Single motor drive for belt and plow- no reversing switch needed
  • Optional one or two way plow w/high density polyethylene liner
  • 7/32" diameter plow cable (minimum strength 2600 lbs)
  • A full 4" diameter, deep V-pulley with pulley cleaner
  • Drive reduction system at "drop off end"
  • V-belt and chain reduction drive system - easy to maintain
  • 16 gauge galvanized steel construction (trough & sides)
  • Frame sections: 5' - 8' -10'
Badger 8910A

Badger Model 8910A Power Shuttle Feeder

  • Feed up to 250'
  • Standard operating capacity - approx. 54 feet per minute - approx. 65 cubic feet per minute; approx. 52 bushel per minute
  • V-belt and worm gear drive
  • Drive reduction system at center of feed bunk
  • 2 HP or less depending on feeder length
  • >No conveying belts, chains or cables
  • Center loading
  • 14 gauge galvanized steel trough
  • Frame sections: 2.5' -5'-10'